50 Caliber Racing Panhard Bar Fabrication Kit 7/8 Thread, 7/8 Bore Chromoly PTFE Heim Joints, Bungs and HMS Spacers for 1.75 OD .250 Wall Tubing [6101B53]

50 Caliber Racing Panhard Bar Fabrication Kit 7/8 Thread, 7/8 Bore Chromoly PTFE Heim Joints, Bungs and HMS Spacers for 1.75 OD .250 Wall Tubing [6101B53]

50 Caliber Racing Panhard Bar Fab Kit - 7/8-14 x 7/8 Chromoly Heim Joints, Bungs and Misalignment Spacers for .250 Wall 1.75 OD Tubing [6101B53]

Rod end fabrication kit complete with 7/8 thread x 7/8 bore chromoly heim joints, jam nuts, and chromoly weld in bungs (tube adapter). Designed to fit 1.75 OD tubing, with wall thickness of .250. Heim joints are made from 4130 Chromoly steel, with a nylon / teflon PTFE liner. The load rating and size make these excellent for building custom sway bar links, tie rods and radius arms for cars, trucks, sand rails and more. Includes Left and Right hand thread heim joints, bungs and high misalignment spacers.

Includes:
- (1) 7/8-14 x 7/8 bore Heim - RH Thread
- (1) 7/8-14 x 7/8 bore Heim - LH Thread
- (1) RH Jam Nut
- (1) LH Jam Nut
- (1) RH Weld in Bung (tubing adapter)
- (1) LH Weld in Bung (tubing adapter)
- (4) Misalignment spacers

Heim Joints:
- 4130 Chromoly Steel, Nylon / Teflon (PTFE) Liner
- 52100 hardened bearing steel ball
- Static radial load rating: 45,051 lb
- Thread pitch: 7/8-14
- Thread length: 2.00
- Bore: 7/8
- Socket end diameter: 2.00
- Socket width: .765
- Ball width: .875
- Center line length: 3.375

Bungs:
- Thread: Female 7/8-14
- Material: Chromoly Steel
- Thread Length: Full length
- 1.75 OD x .250 Wall x 1.25 ID

Misalignment Spacers:
- Material: Chromoly Steel
- Surface finish: Zinc plated
- .750 ID x .869 OD x .926 W
- Compatible with 3/4 bolt size

Perfect for fabricating custom suspension and steering linkage on your 4x4, sand rail, hot rod, race car, utv and more!

- 3 and 4 Link Radius Rods
- Watts Links
- Tie rods
- Control arms
- Sway bar links
- Panhard bar / trackbar
- Hi Steer
- Custom Mounts

Features of 50 Caliber Racing Panhard Bar Fabrication Kit 7/8 Thread, 7/8 Bore Chromoly PTFE Heim Joints, Bungs and HMS Spacers for 1.75 OD .250 Wall Tubing [6101B53]

Rod End Fabrication Kit for 1.75 OD Tubing - Chromoly Heim Joint with PTFE Liner | 7/8 Thread, 7/8 Bore Chromoly PTFE Heim Joints & Bungs for 1.75 OD .120 or .250 Wall Round Tubing | Excellent for building a custom Panhard Bar, Sway bar end links, tie rods, and radius arms | Each kit Includes: 1 RHT and 1 LHT Heim Joint, Jam nuts and Matching Bungs | Misalignment spacers are optional, be sure to choose correct kit before ordering!